Introduction to viewing all photos and inputs in the Arc tool
00:35
Viewing All Photos
01:24
Sorting Photos
Transcript
00:00
Hey everyone.
00:01
Today I'm going to walk you through how to see all of your photos or all of your inputs while you're using the Arc tool.
00:11
So just to get everyone kind of acquainted with where we're at in the report, we're on the COVID page.
00:18
We have the assistant open to the side and we have the table of contents open to the left side.
00:24
Now, let's say I'm writing Section 5.3.1, the wall assembly, and I click in here and I'm reading everything and that's fine.
00:34
And I go over to my inputs and show all photos, but I'm really looking for a photo that's going to verify something that I remember seeing on site that I'm not quite seeing in the photos that are being shown to me.
00:49
What I'm gonna do is I'm going to go up to this little dropdown here, and I'm going to click all sections.
00:57
That will immediately take me to being able to see all of my photos.
01:02
And so you'll know that you're there because you'll have seen that the photo items shifted from, I think the count was 11 to now it's 97.
01:13
So if you ever want to filter your photos for or sort them for the order of the photos that you took on site, the first thing that I'll say is they will come up in alphabetical order.
01:26
So if your photos are already named in numerical order or alphabetical order, then they will show up in order of how you took them on site.
01:35
You can also always go to filter them and just go to oldest.
01:39
They didn't re-filter because they were already in the correct order, but that's how you can see all of your photos.
01:45
If you jump over to documents, you'll also see that you can now just scroll through and look at all of your documents.
01:53
Where this is mostly helpful is in the photo log, but first things first, before I jump down there, just as a reminder, if you are in all sections and you want the system to go back to following your cursor, You just want to make sure that that is blue.
02:10
Now, let's say I wrote all of my sections and I'm ready for the photo log.
02:14
If I scroll down to the photo log, the way it is set up is that every 2 photos are a different system and it's in order of Section 5.
02:23
So if I go down to the photo log and click Photos, maybe we'll see that we're on Site Access, for example.
02:31
If I want to go to Parking, I can just change and move through the photo log as I move through- move through the sections as I move through the photo log.
02:43
So if I want to add maybe this photo for asphalt parking and this photo, I can do that.
02:53
And maybe then I just want to go straight to curbs because there were no other sections in there.
02:59
So this is a good example of sometimes when the system gets confused.
03:02
It's not showing me curb photos.
03:04
The other way that I like to go through the photo log is to just go up to all sections.
03:09
Your photos are now sorted in order of how you moved through the building.
03:13
And you can just scroll through them as you normally would, and you can do your photo log that way.
03:19
So at a very high level, just to cover that, anytime you want to see all of your inputs, all of your photos, all of your documents, if the system isn't sorting them properly, you can always go up to this dropdown and click All Sections.
03:36
This is how you can then move through the report.
03:38
And go through it looking at all of your photos or all of the inputs that you uploaded.
03:44
When you want to go back to moving through section by section, you can just go back to Follow Cursor, and you'll notice now that if I go back up to the wall assembly, it will move with me.
03:56
Let us know if you have any other questions, and we're always happy to make more videos to show you tips and tricks on how to use the Assistant.