Rudus Demo v0.6

This is Rudus AI powered takeoff for Concrete.

To show you what's possible, let's start by uploading an example plan.

I'm going to choose a plan set that I already have, and the first thing you'll notice is that it opens up into this overview tab.

There's, a decent amount happening here, but the main important thing is that as soon as you upload plans, a bunch of scans will start.

And these are all AI scans.

Now, they'll take a second, so to save time, I'm going to go to a different project with the exact same set of plans uploaded, but all the scans have already finished.

So here we go.

The same SPOC PDF uploaded, but all the scans have finished.

Now, let's go through all these one by one.

The first thing is naming sheets with AI.

As you can see in the overview tab here, every single sheet here, the number and the names have been done automatically by our AI, which looks through every single sheet, finds a sheet name and number, and sets it based off of that.

The next thing it does is also auto scaling.

So you can see in the top right of all of these that these sheets have all been scaled.

I did not do that manually.

What our AI actually does is that it'll first try to find the scale on the sheet.

So Here it found 1, 8 inch equals 1 foot.

But then next it'll also find these dimensions on the sheet, one or two or more if it can, and verify it against the actual scale on the sheet to make sure it's correct.

So not only does our AI find the scale, but it also verifies it.

And if it can't verify it, it'll tell you that very clearly.

Here it was able to verify all of them.

The next scan that shows up is detail navigation.

So one thing that's nice is that every single detail callout gets highlighted in green, which you can click, and when you click it, it goes directly to the detail.

Every detail is highlighted in purple.

and if you click on these purple highlights, it'll show you all the referenced callouts that you can actually jump to by going here.

So for this one, I can click on here to go directly to that first one, and I can click on the second one to go to its second call out.

The next thing that I want to show is the AI chat.

So we have a few different features here.

One of them is the AI chat in which you can ask it anything about the project's conditions, drawings or takeoff.

So an example here, a very common one is to.

Is that we have a foundation plan and we have a schedule here that we want to create footings from to start doing our takeoff.

Now we could do this manually or we could go in and ask create conditions from the footing schedule.

Now our AI chat will go in, try to find the footing schedule on whichever page may not, may not even be on this page, but we know that it is.

And then it'll create conditions here for us to take off with.

So just created these, these weren't there before.

and we can see here that all of these were created along with the correct dimensions right here.

The height, thickness and width.

Now if I go through, I can start doing takeoff with them.

for example, you know the, the old way would be to click on P6 and place it down right here.

But what our takeoff software does is that as soon as you place down a footing, it tries to figure out what other footings exist on this sheet.

So it fills in some information by itself that you can change yourself.

But here it selected everything correctly.

The mark, the size, the dimensions and the label.

And it tries to find the rest across the sheet.

So it tries to find the P6 footings across the sheet.

Here I believe there's only one more and it gives me it as an option.

And I can say, I want to keep it.

So not super impressive if it's just one.

But if I go to a different footing that has a bunch across the sheet, for example a P1 and I go in and I place down a P1, it finds all of this around it and I can say find footings and it should highlight a bunch more for me.

It does this in batches.

So if it can't find all of them at once, it'll tell you these are all the ones I can find.

If these are correct, I'll try to find more.

So I keep all 14 here.

These all look good.

Let's see what else it can find.

Cool.

It finds even more and it'll keep going through until it thinks it's found all of them.

So that's how it works.

Interest of time, I'll stop this here.

The next thing I want to show and the last thing is our slab autocomplete.

So I'll go to a different project for this because better shown here.

But not only can you do auto complete footings, but also slabs.

Now here, if I have this suspended slab that I want to take off, I already have a condition.

So I'll start doing the takeoff here.

Right.

I'll click on a few points go around and try to do this takeoff.

And ideally what should happen is that as we go through, our AI should try to figure out what we're doing and give us an example to autocomplete.

So you so here it figured out we're going to autocomplete the slab.

It figured out that these are little blockouts that are greater than 100 square feet, so it removed them for us and I realized that these are blockouts as well as a different size slab.

So if I click tab should autocomplete it and lets me do that without having to click on every single point around the area.

Same with this one.

If I have another condition and I go through and click on this slab, it should auto complete that for me as well.

Click tab and it shows up.

Once you've completed your takeoff, you can see all of your quantities in your summary here.

and you can export them directly to your estimating template.

With all the companies that we work with, we provide them with custom export solutions that allows them to instantly select their template here and preview and send it right to their estimating template in one click.

So you no longer have to copy all your quantities and and paste them into your estimating template.

So overall, that's Rudus: AI Powered Takeoff for concrete.

If you have any questions or have any interest, please reach out to us through our website.